X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
Closed Thread
Page 1 of 3 123 LastLast
Results 1 to 10 of 27
  1. #1
    Join Date
    25th December 07
    Location
    Sacramento, CA
    Posts
    887

    Moving the buckles-TAKE NOTE

    One thing thats an easy resort for a kilt thats gotten too big is to undo the buckles and move them back to accomidate tightening. Seems easy, but this is a tricky processs. Next time you see someone wearing a kilt with the sporran/belt loops mis-aligned to one side, you'll know what I mean. A kilt is a custom constructed garment that utilizes a formula for fitting its owners measurements.
    The underapron is the key. Some kilts have the be........Sorry for the break-my wife just called and the car has blown a tire and I have to go take care of this. I'll continue this when I return. If anyone wants to share their tips on this subject, feel free.

  2. #2
    Join Date
    5th November 10
    Location
    San Diego, California, USA
    Posts
    345
    Is this the right place? This is the new cliff-hanger story thread, right?
    MEMBER: Kilted Cognoscenti

  3. #3
    Join Date
    25th December 08
    Location
    Lotus Land
    Posts
    1,894
    ooo ... ooo ... Good time to get popcorn.
    Etcheberri Steaphan MacDòmhnall - See my avatar for the fabric I am currently working with.
    He was a dreamer, a thinker, a speculative philosopher ...
    or, as his wife would have it, an idiot. ~ Douglas Adams

  4. #4
    Join Date
    11th April 10
    Location
    Carmichael, CA
    Posts
    371
    If you are hopeful you will shrink (up to 4 inches) but do not want to delay ordering a kilt is it better if the kilt is pleated to the stripe and has no belt loops. That way the apron stripe can be centered and the back looks fine.

  5. #5
    Join Date
    25th December 08
    Location
    Lotus Land
    Posts
    1,894
    Quote Originally Posted by McElmurry View Post
    If you are hopeful you will shrink (up to 4 inches) but do not want to delay ordering a kilt is it better if the kilt is pleated to the stripe and has no belt loops. That way the apron stripe can be centered and the back looks fine.
    While this can be advantageous, I would likely defer to the sett first to be sure it will look good that way at all. It is best to order the kilt at your ideal weight when you reach it.
    Etcheberri Steaphan MacDòmhnall - See my avatar for the fabric I am currently working with.
    He was a dreamer, a thinker, a speculative philosopher ...
    or, as his wife would have it, an idiot. ~ Douglas Adams

  6. #6
    Join Date
    17th January 09
    Location
    Norfolk, England
    Posts
    4,508
    I am so glad that you all posted, I didn't want to be the first.

    I don't have any special sewing skills. But I was taught to sew buttons on 51 years ago and I can put a new zip in a pair of Levi's using a hand-cranked Singer.

    And I can change the buckles and straps on a kilt in 59 minutes. I find the process straightforward, rather than tricky. Maybe, I'm doing it wrong.

    Regards

    Chas
    Stand and be counted!
    All it takes for evil to flourish, is for good men to do nothing.

  7. #7
    Join Date
    12th December 10
    Location
    Sophomorehood, Fairbanks, Alaska
    Posts
    563
    Here is mine. I bought one a little too big so I could be sure of the length to order for my good kilt.

    I moved each buckle three inches. I cut a new hole for the inner apron strap to pass through. The box pleat lays on the very front of my right thigh and the end of the inner apron reaches almost to the back midline of my left thigh.

    The "left" belt loop lays almost exactly on the middle of my spinal column, the "right" belt loop is within an inch of being all the way out on my right hip.


  8. #8
    Join Date
    17th January 09
    Location
    Norfolk, England
    Posts
    4,508
    When I do it, I move the buckle on the right side, but the strap on the left side. If they are moved by the same amount the centre back stays in the same place. Also you don't have to cut new holes.

    Regards

    Chas
    Stand and be counted!
    All it takes for evil to flourish, is for good men to do nothing.

  9. #9
    Join Date
    12th December 10
    Location
    Sophomorehood, Fairbanks, Alaska
    Posts
    563
    Quote Originally Posted by Chas View Post
    When I do it, I move the buckle on the right side, but the strap on the left side. If they are moved by the same amount the centre back stays in the same place. Also you don't have to cut new holes.

    Regards

    Chas
    Dang it. I almost did that with mine. I was afraid the loose end of the inner apron wold sag below the bottom of the rest of the kilt.

    Is this a non issue, something that only works if you move the strap a little bit, or do you cut off the excess?

  10. #10
    Join Date
    15th April 07
    Location
    State College, PA
    Posts
    2,403
    I would say you could move the strap about 2" without concern. If you move it more, the edge of the under apron may feel uncomfortable on the back of the leg.
    Wallace Catanach, Kiltmaker

    A day without killting is like a day without sunshine.

Closed Thread
Page 1 of 3 123 LastLast

Similar Threads

  1. Moving buckles - how much is too much??
    By Barb T. in forum Hint and tips from Barb T.
    Replies: 6
    Last Post: 11th June 10, 05:00 AM
  2. Operation Moving Buckles
    By nh_maclean in forum Show us your pics
    Replies: 6
    Last Post: 15th October 09, 10:12 PM
  3. Just an eye note
    By Bill in forum Miscellaneous Forum
    Replies: 30
    Last Post: 8th February 07, 03:44 PM
  4. Another sad note ...
    By Derek in forum Miscellaneous Forum
    Replies: 34
    Last Post: 17th May 06, 11:46 AM
  5. just a note ...
    By awoodfellow in forum General Kilt Talk
    Replies: 10
    Last Post: 6th August 04, 06:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0