No more pins for make an XKilt

**cacunn** · 7th February 08, 05:12 PM

Welcome

I am wondering about the built up of sticky from the tape on the presser foot and parts of the sewing machine.

**cacunn** · 7th February 08, 05:14 PM

Originally Posted by Palactapuss

i just made my first and the next one will be easier!

Palactapuss welcome to the group. Do you realize that you are just up the road from the Tartan Museum in Franklin NC. Just up the road is relative term but well worth the trip.

**AndresPapousek** · 8th February 08, 11:54 AM

Originally Posted by cacunn

Welcome

I am wondering about the built up of sticky from the tape on the presser foot and parts of the sewing machine.

Masking Tape here is that made of paper. Painters use it.

It doesnot let any sticky residues on the cotton or canvas. And you must to remove the tape just before touch the presser foot. By that time it do it job. Stop the sewing, takeoff the tape, continue sewing.

And Don't Ironing the tape.

**LadyGriffin** · 8th February 08, 06:19 PM

have any of you tried waxed freezer wrap? It is an old quilters trick. Trace pattern on paper side of freezer wrap, iron on fabric, cut out, peel off.

It works for holding down stubborn seams. I just stitch through it, then peel off.

Julie

and the wax does NOT stay on the fabric

**MacDanar** · 9th February 08, 06:53 AM

¡Bienvenidos! Hope you enjoy things in our little corner of the internet.

**AndresPapousek** · 15th February 08, 03:25 PM

I just Quick reply somethig and now i dont see it. So here goes again:

If you want to see the masking tape in action see this post:

http://www.xmarksthescot.com/forum/p....html?p=491609

Andres