-
18th December 11, 07:24 PM
#41
Re: tweed argyll conversion started...
Note to self: Must remember the pleaty bit goes at the back...
-
19th December 11, 12:04 AM
#42
Re: tweed argyll conversion started...
NICE job. Most of the conversions, including my own, seem to wind up too short. You have avoided this, and your sporran curve looks excellent. Most are too "sharp" and then too straight.
The braided epaulettes are the bomb. *well done*
Order of the Kilted Lebowskis
Formerly Tasteful Aesthete
-
19th December 11, 03:42 AM
#43
Re: tweed argyll conversion started...
 Originally Posted by Alan H
NICE job. Most of the conversions, including my own, seem to wind up too short. You have avoided this, and your sporran curve looks excellent. Most are too "sharp" and then too straight.
The braided epaulettes are the bomb. *well done*
My recommendation for length is go to the widest part of your hip... You might be able to trade off the pockets being moved against lengthening the sleeves if you buy a shorter fitting than you would normally... (S vs M, M vs L)
The curves were taken from my store bought argyll, and there's printable ones in my album
Note to self: Must remember the pleaty bit goes at the back...
-
19th December 11, 03:27 PM
#44
Re: tweed argyll conversion started...
That is sharp. I had to go back and look at the epaulets after Alan mentioned them. Nice touch! One of these days I might try that myself. Never crossed my mind until now!
I looked at the pics three times before I noticed the four button cuffs vs three we usually see. I like details that look really sharp but don't jump out right away. Well done.
Last edited by Whidbey78; 19th December 11 at 03:33 PM.
The grass is greener on the other side of the fence...and it's usually greenest right above the septic tank.
Allen
-
19th December 11, 07:04 PM
#45
Re: tweed argyll conversion started...
You prob also missed that the cuffs go to where they should too rather than being flaps on the sleeve...
Note to self: Must remember the pleaty bit goes at the back...
-
20th December 11, 12:31 AM
#46
Re: tweed argyll conversion started...
T. E. ("TERRY") HOLMES
proud descendant of the McReynolds/MacRanalds of Ulster & Keppoch, Somerled & Robert the Bruce.
"Ah, here comes the Bold Highlander. No arse in his breeks but too proud to tug his forelock..." Rob Roy (1995)
-
20th December 11, 02:08 PM
#47
-
20th December 11, 02:38 PM
#48
Re: tweed argyll conversion started...
 Originally Posted by MT4Runner
I am envious of the beautiful blue Shepherd's check jacket you found.
I moved too slowly on a black/white Shepherd's check and didn't buy it--it was gone the next day.
The pocket details are fantastic! Did you hand or machine sew them?
Are those considered "Argyll" or "Braemar" cuffs?
Please excuse the newbie question. I'm still trying to get all the terminology straight in my own mind!
It's a really nice Donegal tweed...
The pockets were hand sewn I havent braved using a sewing machine for anything yet... i have 2 of a friends in the back if my car waiting for me to transfer the motor over though, so never know...
Technically I'd call them mariner cuffs... Argyll jackets usually get gauntlet cuffs
Note to self: Must remember the pleaty bit goes at the back...
-
20th December 11, 03:39 PM
#49
Re: tweed argyll conversion started...
Thank you for the clarification!
1/8 Scots, kiltmaker, boater, wheeler!
-
20th December 11, 07:19 PM
#50
Re: tweed argyll conversion started...
 Originally Posted by madmacs
<snip>
Technically I'd call them mariner cuffs... Argyll jackets usually get gauntlet cuffs
Yes mariner cuffs, but also sometimes flap or Braemar, just to confuse the matter.
Colin McGuire aka Ronin E-Ville
- Justitia et fortitudo invincibilia sunt
- An t'arm breac dearg
Similar Threads
-
By Mickey in forum DIY Showroom
Replies: 8
Last Post: 17th May 11, 10:43 AM
-
By Spartan in forum General Kilt Talk
Replies: 13
Last Post: 26th April 09, 08:18 PM
-
By Packhound in forum DIY Showroom
Replies: 25
Last Post: 21st September 08, 09:41 PM
-
By Captain Karrot in forum DIY Showroom
Replies: 10
Last Post: 20th December 07, 01:23 PM
-
By Fedgunner in forum DIY Showroom
Replies: 4
Last Post: 11th November 07, 06:42 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
|
|
Bookmarks