-
10th April 17, 04:19 PM
#1
Antler Buttons?
This is not so much a how to, in the first post, but perhaps it will turn into one. If a Moderator feels this should be someplace else, feel free to move.
Looking at hole saws, in smaller sizes, 1/2, 3/4 and 7/8th inch, ones that do not have a centering bit in them. Seems that if you had these saws, and a bunch of shed antler laying around, you could drill completely thru an antler, and then that circular piece inside the saw could be made into a pair of buttons, drilling 2 or 4 holes, or even installing a metal shank.
Has anyone done this? Ive got a few sheds that I have picked up that I could perfect the process before procuring actual European stag antlers.
-
-
11th April 17, 02:58 AM
#2
Use a hole saw with center bit to drill a hole in a piece of 3/4" or thicker plywood. Remove center bit from hole saw. Clamp plywood to area you want to drill. Put hole saw in pre drilled hole....done.
-
The Following 4 Users say 'Aye' to kiltedcontractor For This Useful Post:
-
11th April 17, 09:46 AM
#3
I have thought about trying this a million times but have not. Anyway, you all (mainly MacGillie) made me do it...
Vestis virum reddit
-
The Following 5 Users say 'Aye' to IsaacW For This Useful Post:
-
11th April 17, 04:04 PM
#4
I'd not considered boring antler to cut the core into buttons - but had looked at the elk antler a friend's dog was chewing on the other day and figured could get a few buttons from each point by cutting laterally. Not very expensive at all at the pet shop, and the remnants would go to good use by the dog.
Nicely done, Issac
-
The Following User Says 'Aye' to Taskr For This Useful Post:
-
12th April 17, 08:19 AM
#5
I've always wondered about doing this as well. I have a ton of antler sheds, and could make a whole bunch of these if I ever had the time or inclination to do so. My thought would be to remove the centering bit from the hole saw, clamp the antler in my drill press, and then cut. Each cylinder would produce two buttons, once the center portion is removed. I'd make a jig to hold the buttons for drilling the thread holes in the drill press as well.
-
-
11th June 17, 06:47 AM
#6
Originally Posted by Taskr
I'd not considered boring antler to cut the core into buttons - but had looked at the elk antler a friend's dog was chewing on the other day and figured could get a few buttons from each point by cutting laterally. Not very expensive at all at the pet shop, and the remnants would go to good use by the dog.
Nicely done, Issac
So I'm not the only one who's used the pet store antler for making things huh??? I got a Damascus steel Sgian Dubh blade blank and fixed it into a elk antler point, maybe not everyone's cup of tea but I love it 😊
IMG_6774.JPG
-
The Following User Says 'Aye' to AussieInOhio75 For This Useful Post:
-
Originally Posted by IsaacW
I have thought about trying this a million times but have not. Anyway, you all (mainly MacGillie) made me do it...
Those look good Isaac. Having drilled antler sheds myself (for other reasons), I gotta ask... How many hole saws/bits did you burn up?
Tulach Ard
-
-
Originally Posted by MacKenzie
Those look good Isaac. Having drilled antler sheds myself (for other reasons), I gotta ask... How many hole saws/bits did you burn up?
I have made a good pile of them now. I have a hole saw bit for each size (2 sizes) and have not burnt one up yet.
Vestis virum reddit
-
The Following User Says 'Aye' to IsaacW For This Useful Post:
-
11th June 17, 06:42 AM
#9
Originally Posted by IsaacW
I have thought about trying this a million times but have not. Anyway, you all (mainly MacGillie) made me do it...
Wow! I absolutely love these!
-
-
8th June 17, 10:17 AM
#10
On a technical note, my questions would be, what belt setting was your drill press and was this a dry or wet drilling of the antler buttons? If you did this with a hand drill, your skill surpasses my patience level and steadiness of hand. I commend you on the quality of work.
Last edited by Tarheel; 8th June 17 at 10:19 AM.
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks