X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    5th June 10
    Location
    33° 53' 19" N / 117° 48' 44" W
    Posts
    187
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Question about bias cut tartan waistcoats.

    Hello there,

    I'm a novice at sewing but have a keen interest in making my own kilt and matching tartan waistcoat
    (one of the reasons being that most kilts tend to be too long off the peg).

    I was wondering how much yardage is typically needed for a bias cut tartan waistcoat?

    How much yardage would be needed for a 44in chest?

    Any information would be greatly appreciated.
    Thank you for your time.

  2. #2
    Join Date
    24th September 04
    Location
    Victoria, BC Canada 48° 25' 47.31"N 123° 20' 4.59" W
    Posts
    4,311
    Mentioned
    16 Post(s)
    Tagged
    0 Thread(s)
    One of the best ways is to go to your local fabric store and find a vest pattern in your size. If you look on the package it will tell you how much fabric you will need. It will usually specify the amount if on the grain and if an the bias.
    Steve Ashton
    Forum Owner

  3. The Following 2 Users say 'Aye' to Steve Ashton For This Useful Post:


  4. #3
    Join Date
    5th June 10
    Location
    33° 53' 19" N / 117° 48' 44" W
    Posts
    187
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Question about bias cut tartan waistcoats.

    Dear Steve,

    Thank you for the wonderful advice.
    I'll be sure to do that next time I hit up the local fabric store.

    I'm very optimistic about this future project.
    But will be sure to practice before tackling the job.

    I greatly appreciate your help.

  5. #4
    Join Date
    5th August 14
    Location
    Oxford, Mississippi
    Posts
    4,756
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    Here's a direction to explore. This pattern selection from Butterick offers lapels and pocket coverings.
    Good luck on the project. Here's the link that will give you yardage.
    https://butterick.mccall.com/b6339
    Last edited by Tarheel; 8th January 18 at 05:24 AM.

  6. The Following User Says 'Aye' to Tarheel For This Useful Post:


  7. #5
    Join Date
    30th November 04
    Location
    Deansboro, NY
    Posts
    3,326
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)
    You'll also need to decide whether you want a plain satin back or a tartan back. You'll need less tartan if you want a satin back (which is common).
    Kiltmaker, piper, and geologist (one of the few, the proud, with brains for rocks....
    Member, Scottish Tartans Authority
    Geology stuff (mostly) at http://people.hamilton.edu/btewksbu
    The Art of Kiltmaking at http://theartofkiltmaking.com

  8. The Following User Says 'Aye' to Barb T For This Useful Post:


  9. #6
    Join Date
    24th September 04
    Location
    Victoria, BC Canada 48° 25' 47.31"N 123° 20' 4.59" W
    Posts
    4,311
    Mentioned
    16 Post(s)
    Tagged
    0 Thread(s)
    Just old cranky Steve being pendantic again -

    When I was young, I was taught that it was evident that vests with satin backs, and the little adjusment belts, were not intended as outerwear. That if you were wearing a satin backed vest and removed your jacket - you also removed the vest.

    I guess old habits die hard. I once gave a talk in a room that was quite warm. The audience was primarily older ladies. After the talk one of them came up to me and commented that it was nice to hear a man ask a ladies permission before removing his jacket and vest in mixed company. I had not noticed that I had done so.
    Steve Ashton
    Forum Owner

  10. The Following User Says 'Aye' to Steve Ashton For This Useful Post:


  11. #7
    Join Date
    16th June 15
    Location
    Madison Wisconsin
    Posts
    327
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)
    It might also be possible to think outside the box a bit. This is one my wife made me using Harris Tweed on the front and a medium weight cotton/poly suede cloth for the back and lapels. It has more fabric heft and less of that "underwear" look on the back than my satin-backed vests and was carefully fitted and tapered so that there is no need for the little belt on the back. Traditional? Maybe not, but to my eye it looks finished enough on the back to stand alone. This style also takes a minimal amount of wool or tartan.

    Last edited by Todd Bradshaw; 8th January 18 at 10:30 AM.

  12. The Following 5 Users say 'Aye' to Todd Bradshaw For This Useful Post:


  13. #8
    Terry Searl is offline Registration terminated at the member's request
    Join Date
    13th September 07
    Location
    Vancouver Island, British Columbia, Canada
    Posts
    546
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Great

    Very nice it is as well.....you are lucky to be wedded to such a talented lady

  14. The Following User Says 'Aye' to Terry Searl For This Useful Post:


  15. #9
    Join Date
    5th June 10
    Location
    33° 53' 19" N / 117° 48' 44" W
    Posts
    187
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Hello there,

    I'm grateful for all the recommendations and tips.

    Have to admit that I'm aiming towards a waistcoat with tartan front to back. Satin would be the secondary choice, but I got to admit I want to make something a bit different than what is usually available commercially.
    Though having a complimenting tweed or wool on the back has crossed my mind.

    Also, I was just looking at that same pattern!
    Might actually pull the trigger on them.
    Really like the cuts seen in the Kenneth MacLeay portraits and these patterns are seem to be modeled closer to slimmer silhouettes that I find very keen.

  16. #10
    Join Date
    5th August 14
    Location
    Oxford, Mississippi
    Posts
    4,756
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    I notice the Butterick patterns offer extra darts in the front of the vest (illustrated in the photo I posted) that will slim the effect from underarm to waist. I expect there is more distance from the neck to the shoulder in the pattern that will further enhance the slimming effect.

    I remember my grandmother would take a pattern, measure us children, and expand the pattern onto craft paper to individualize clothes for each child's shape. The clothes survived several years of "hand-me-down" use.

  17. The Following User Says 'Aye' to Tarheel For This Useful Post:


Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0