X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Hybrid View

  1. #1
    Join Date
    27th October 09
    Location
    Kerrville, Texas
    Posts
    5,689
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)

    Making a Day Plaid (Laird's Plaid) - Tutorial

    I’ve been wanting a day plaid (laird’s plaid) since 2012 when I had my Reproduction Colquhoun kilt made. I had ordered 9 yards of double-width tartan from DC Dalgliesh, with 4 yards to be used for my kilt (these 4 yards of double-width become 8 yards of kilt). I planned to use the remaining 5 yards for a waistcoat on-the-bias and a day plaid. I originally discussed my plan here. Read that thread for some valuable background information.

    Well, fast-forward 6 years, and I hadn’t done anything with the remaining tartan material. I actually couldn’t find it for the last 2 years. We had moved, and it was hidden in a box in the back of a closet. But I realised that I needed to get this done. I had skipped the San Antonio Highland Games earlier this year because it was too cold and windy, and although I did go to the Salado Highland Games a few weeks ago, I was pretty cold. I figured a day plaid would have made the difference! It was time to do this.

    So, on to the project. I’m posting this in the Tutorials forum to document how I made it and discuss some of the technical issues involved.

    First, I started with my unrolled tartan material, shown below. It was just a few inches shy of 5 yards. It’s double-width, folded in half width-wise so it would fit in my hallway.



    To determine the length I wanted to make it, I folded it to the correct width for wearing (folded in half width-wise, then again) and draped it over my shoulder to hang to the length I wanted in front. Then I grabbed it from the top of my shoulder and pulled it off, folding it at that point and marking where the front bottom edge met the back. Then that length is doubled, since the plaid is folded twice length-wise when worn. For my height, it turned out to be right at 3-1/2 yards (10-1/2 feet) that was ideal.

    To be clear, this means that the 10-1/2 feet (126 inches) is folded length-wise to become 5-1/4 feet (63 inches). Then that length is draped over the shoulder with half in front and half in back (31-1/2 inches on either side). A taller person, or a person who desires a lower hanging plaid, may want 4 yard or more.

    Cutting that beautiful length of tartan took a bit of courage on my part, and no small amount of second-guessing.

    Next, I took a piece of scrap material leftover from cutting the pleat material out of the top of my kilt (I had Barb Tewksbury send me these scraps) and tested my fringe-making/purling technique. I’ll describe that below. But I was happy with the test sample and ready to start making the plaid.



    Out of curiosity, I decided to weigh my tartan material. Knowing I had just cut it to 3-1/2 yards, I could easily back-calculate the nominal material weight. It came out to 55.2 ounces, which converts to 15.77 oz material. That’s close enough for me, as DC Dalgliesh’s tartan is supposed to be in the 15-16 oz weight range.



    Making a day plaid out of double-width material is as simple as cutting to length and fringing/purling the ends. Simple, right? Not so much, at least for this amateur. This process took me about 25 man-hours from start to finish. It is a very tedious, laborious process. A professional could do it quicker (and indeed I sped up quite a bit as my technique and process got better), but I just had to struggle through.

    A quick note on terminology. In weaving, warp threads are the threads that run the length of the material. Weft threads are the cross-threads that go from selvedge to selvedge.

    First, the raw ends have to be fringed by pulling out enough weft threads so that there is about 6 inches of warp threads hanging out. These will be purled by hand. Pulling out the weft threads is easy at first, when there’s very little warp thread exposed. You pretty much just grab a thread and start pulling. It sort of “unzips” itself. As you can see below, this tartan material from DC Dalgliesh uses a true kilting selvedge where the weft threads just loop around the end warp threads.



    As more and more length of warp threads are exposed, the weft threads get more difficult to unzip. There’s a lot of friction there and the warp threads will tangle up as the weft threads come out. I found that once the tangles start happening, it’s easier to stop pulling threads out the end of the material and start pulling them out the side. In the photo below, I would pull the blue thread to the right. There’s still a lot of friction as the threads have to move through the over/under locking of the warp threads. But it can be done, albeit slowly. Too quick or too hard, and the threads break.



    In order to pull the weft threads out from one selvedge side, the opposite selvedge has to be cut. Remember, these weft threads are continuous and just loop back and forth. So the loop at one end has to be cut so the opposite side loop can be tugged out. What I did was use a needle to tease the weft threads up enough that I could cut each thread with scissors near the left side selvedge. Then remove the short pieces that looped over that side. This left raw thread ends, as shown below. These could then be tugged out the right side.



    Once that process was complete, I had about 6 inches of warp threads forming a fine fringe at each end. The first end of the plaid took me about 6 hours to get to this point, but the second end only took me 2-1/2 hours due to refining my process. The raw fringed end:



    The next step was to purl the ends. I did this by carefully and mathematically selecting the number of threads I wanted to put in each purled fringe, so that they ended up in colour blocks to match my tartan. I wanted to minimise the mixing of different coloured threads in each purled fringe. For my purposes, each purled fringe took 6, 7, or 8 threads.

    Purling the threads is a process of making two twisted strands and then twisting those together and knotting them. Below is an example of an 8-thread purl. First, I separated two blocks of 4 threads each. These have to be carefully taken from the fine fringe to make sure they’re in sequential order.



    Next, each block of 4 threads gets twisted to the right (clockwise) by 10 twists, or until they’re good and tight. The result is two right-twisted strands.



    Last, these two strands are back-twisted together. Since they were each twisted clockwise, the final purl puts these together and twists them anti-clockwise by the same count (10 twists). Then a simple knot at the end. The result is an 8-thread purl that has a permanent twist that won’t untwist itself.



    That’s pretty much the process. But it takes hour after hour after painstaking hour! Just for reference, this tartan has 270 threads in each sett repeat. And the double-width cloth has 8 setts plus about 92 extra threads. So that’s 2252 threads on each end that have to be handled on each end for a total of 4,504 threads.

    The way I split the threads, it came out to 36 purled strands per sett. It took 299 purled strands on each end of the plaid (598 total). My fingers are sore!

    I hope my description of the process made sense. If not, please let me know what needs to be clarified. If you have better tips and tricks for the process, please share those too!
    Last edited by Tobus; 22nd November 18 at 06:52 PM.

  2. The Following 11 Users say 'Aye' to Tobus For This Useful Post:


  3. #2
    Join Date
    27th October 09
    Location
    Kerrville, Texas
    Posts
    5,689
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    Now that I’ve described the process, here are the final results.

    The folded plaid with purled ends:



    And the obligatory photos of me wearing it, after all that hard work! First, the typical carrying of a day plaid in the usual fashion when not needed for warmth. If you click the link in my first post, there’s a description there of how to fold it and wear it. The fringed ends go in front with the big fold at the back.



    Next, one example of how it can be unfolded and wrapped around the body for a little extra warmth at the torso. Again, click the link in my first post for more illustrations of additional unfolding to make it into a half-cloak or full-cloak. I don’t have a plaid brooch/pin, so I didn’t show all the options. But it’s pretty simple to just throw the top fold of the plaid back over your shoulder and wrap it around the body.



    With my luck, though, I’ll probably only get to carry it and when it gets cold I’ll have to wrap it around my wife instead of wearing it myself!


  4. #3
    Join Date
    2nd January 10
    Location
    Crieff, Perthshire
    Posts
    4,522
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)
    Nice job. Personally, I prefer a three-plaited fringe such as this one from a c1820-30 plaid. The plaits are sightly heavier, hang well are are really attractive.

    Plaited Fringe.jpg

  5. The Following User Says 'Aye' to figheadair For This Useful Post:


  6. #4
    Join Date
    27th October 09
    Location
    Kerrville, Texas
    Posts
    5,689
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    I do like that, figheadair. But the time spent to braid those would be ...daunting, to say the least. I'm curious as to the method used to gather them so far apart without having loose threads near the base, or starting to curl the cloth between plaits.

    If I had this to do all over again, I would definitely put more threads in each completed strand to make them larger/heavier and reduce the number. When I look at photos and portraits of other fringed plaids, they do seem to be larger diameter.

  7. #5
    Join Date
    2nd January 10
    Location
    Crieff, Perthshire
    Posts
    4,522
    Mentioned
    14 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Tobus View Post
    I do like that, figheadair. But the time spent to braid those would be ...daunting, to say the least. I'm curious as to the method used to gather them so far apart without having loose threads near the base, or starting to curl the cloth between plaits.

    If I had this to do all over again, I would definitely put more threads in each completed strand to make them larger/heavier and reduce the number. When I look at photos and portraits of other fringed plaids, they do seem to be larger diameter.
    I've always done my fringes this way and never had an issue. I find putting a heavy weight on the cloth near the loose ends means that I can pull down away from the cloth.

    I start by separating three equal bands/groups of threads, hold one in between each thumbs and forefinger and the third tucked in the crook of my pinky (little finger). It’s then simply a case of plaiting, like hair, and then finishing with an over-hand knot.

  8. The Following User Says 'Aye' to figheadair For This Useful Post:


  9. #6
    Join Date
    30th January 14
    Location
    North Carolina
    Posts
    747
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Well done, Tobus!

    And thanks for taking the time to document it.
    Last edited by MacKenzie; 30th November 18 at 12:53 PM.
    Tulach Ard

  10. The Following User Says 'Aye' to MacKenzie For This Useful Post:


  11. #7
    Join Date
    24th September 04
    Location
    Victoria, BC Canada 48° 25' 47.31"N 123° 20' 4.59" W
    Posts
    4,311
    Mentioned
    16 Post(s)
    Tagged
    0 Thread(s)
    Here are a couple hints which can make purlling a fringe just a bit easier.

    I pull fringe using a wire bristle dog brush. I pull between 4 and 6 inches.



    Then with two forceps I put the number of yarns for each half of the twist in the jaws and with your fingertips twist each 12-15 turns in the same direction.



    Then just drop both forceps together over the edge of your table and they will spin together putting the twist into the fringe.



    A simple overhand knot finishes off the purl.



    If you don't have a source for forceps you could also find one of these fringe twisters which work the same way.

    Last edited by Steve Ashton; 23rd November 18 at 02:47 PM.
    Steve Ashton
    Forum Owner

  12. The Following 7 Users say 'Aye' to Steve Ashton For This Useful Post:


  13. #8
    Join Date
    23rd April 12
    Location
    Eatern Ontario, Canada
    Posts
    290
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Steve Ashton View Post
    Here are a couple hints which can make purlling a fringe just a bit easier.

    I pull fringe using a wire bristle dog brush. I pull between 4 and 6 inches.

    Then with two forceps I put the number of yarns for each half of the twist in the jaws and with your fingertips twist each 12-15 turns in the same direction.



    Then just drop both forceps together over the edge of your table and they will spin together putting the twist into the fringe.



    A simple overhand knot finishes off the purl.

    If you don't have a source for forceps you could also find one of these fringe twisters which work the same way.






    Ahhhh, the voice of experience! Some handy tips, for sure.

    Tobus, nice job and am glad you posted this. It is a learning experience for all.

    As an aside, don't feel too bad about a six year wait. I bought the same tartan around the same time (June 2012) while it was still a stock item at Dalgliesh and am yet to have the kilt made.

  14. The Following User Says 'Aye' to bodhran4me For This Useful Post:


  15. #9
    Join Date
    27th October 09
    Location
    Kerrville, Texas
    Posts
    5,689
    Mentioned
    8 Post(s)
    Tagged
    0 Thread(s)
    You might not be able to tell in my photos due to the size, but I was actually wearing my plaid upside-down from the way it is recommended in the thread I linked to. When folded and worn over the shoulder, the two selvedge edges should be the bottom layers, with the selvedges sitting next to the neck. That way, you can grab the selvedges and shake down the top fold to let it drape at half-width. Or just grab the bottom selvedge layer and shake out the plaid to full-width, all without ever taking it off your shoulder. But I was wearing it with the selvedges at the top layer, incorrectly.

    I'd like to explore other variations of how to unwrap and wear it, but I will need a big pin or brooch for that. In the meantime, I'm interested in how plaids were worn historically, just out of a sense of visual interest. Take, for instance, the MacLeay portrait below. Most of the plaids in his portraits are worn similarly when wrapped around the chest. The wearer doesn't keep the front hanging down straight, with all the fringe at the bottom. He keeps one corner high at the shoulder and drapes the rest of that end of the plaid diagonally over his arm (not under it), so that the fringe makes for a decorative edge display.

    I'm not that knowledgeable about wearing plaids or even the different types of plaids. The plaids in MacLeay portraits all seem to be fairly short compared to mine. Meaning, when wrapped around the chest they don't drape as far down in the back below the bottom of the kilt like mine. Is this a different style or type of plaid than the day plaid? I mean, all plaids are pretty much the same (except for pipers' plaids, apparently), but do the shorter ones go by a different name? Or is it that his is actually longer and he has it wrapped twice around his chest instead of letting the extra length hang in the back?


  16. #10
    Join Date
    3rd January 06
    Location
    Dorset, on the South coast of England
    Posts
    4,404
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    I wonder if you could use some of the weft threads to thicken up the fringe?

    It would mean even more twisting, but you could increase the numbers of threads of a particular colour if necessary, or make a fatter final cord with perhaps six instead of four threads.

    Anne the Pleater
    I presume to dictate to no man what he shall eat or drink or wherewithal he shall be clothed."
    -- The Hon. Stuart Ruaidri Erskine, The Kilt & How to Wear It, 1901.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0