Ok I cut out the aluminum with a scroll saw - very slowly - then I drilled holes in the cantle (not knowing why )
I just tryed to make it look close to the otheres I had seen .
Then I took a 1" wide 1/4" thick bar and bent it around a vise and then watched you tube over and over on how to weld
Aluminum and I fitted the parts togeather and begun to heat it all up with a
Propane torch . Then I run the rod across it and allowed it to cool.
Then I bought knobs from Home depot and grinded them down some .As I could not find anything esle local
I then cut the hide and shaped it to the metal . All I have left is sewing the bag
I can not firgure out how to sew it at the bottom with out it messing up .
**** So I am at a stand still *****
I want it to hang like horse hair but I want the bag of a cantle 
Last edited by Thomas H; 26th July 12 at 11:05 AM.
Pro 3:5 Trust in the LORD with all thine heart; and lean not unto thine own understanding.
Bookmarks