New sporran belt

[SF Jeff]

I went to a Highland Games a few weeks ago and for the umpteenth time, struggled constantly with my cheap sporran belt. The leather is of such poor quality that it is almost like stiff cardboard. Does not flex at all or conform to my waist, snags on everything (kilt, kilt belt, belt loops, waistcoat, i.e. anything it comes in contact with). It had the most horrible buckle imaginable, and don't get me started on the chain clips. It's a poorly made belt made with inferior materials. Odd, since the sporran it came with is pretty nice quality.

So on my way home I decided to make a new belt. this was Memorial day weekend and Tandy Leather was having a sale so I went the next day and bought all the parts I needed. All of the metal is stainless steel except the chain. The ss chain I wanted was not in stock so I ended up buying a chrome plated chain. It's nice but I will replace it at some point with ss. I wanted to use closed back screw posts rather than rivets but Tandy only had the open back posts in stock, so I went with those. Don't really like the look but it's fine. The leather strap is of very high quality and much better than the old belt. Soft, supple and beautifully dyed. I punched the holes and cut the chains in such a way that the buckle is directly in the mid-line of my back, not off to the side like the old one.

The only piece I used from the old belt is the small pebbled leather piece that the chains clip into. The belt strap was far too thick to fashion a new one of these, so I just reused the old one. All materials came to $26 after the 20% off. I'm so happy with the results that I'm going to make another one with brown leather and antiqued brass hardware. Here are some pics.

sporran_belt_1.jpg

sporran_belt_2.jpg

sporran_belt_3.jpg

sporran_belt_4.jpg

sporran_belt_5.jpg

sporran_belt_6.jpg