Now, I have a 24" long strip that is about 1 1/3" wide, so I cut it in 6 even 4" strips



And I laid them out on the kilt (5 of them) to see about positioning





When I had them right, I pinned them loosely in place and sewed them on. I just went back and forth over the raw edges with a wide zig-zag, then moved in a little and did it again. I thought my machine was going to go up in smoke! After all, I'm sewing through 8-12 layers of corduroy here (think about it-3 layers of belt loop, 4 layers of waistband and 1 to 4 or 5 layers of tapered pleat)!



I sewed snaps on the edges of the inner and outer aprons, with corresponding snaps on the outer and inner aspects of the kilt (these may need to be moved by the "victim" if they're not perfect).



Final product pictures next...

Be well,