Customizing a commercial sgian dubh?

[MurrayInGA]

I did something similar recently. Bought a cheap blade for the nickel silver fittings and ss blade and made my own wood handle and sheath. Came out nice. Would probably buy a nicer full tang blade if I were to do it again. Saw another thread on making a blade on here recently as well, will definitely try in the future. Best of luck!

http://www.xmarksthescot.com/forum/f...w-sgian-97324/

[stickman]

I used to make sgians duhb and have more hand carved handles than I know what to do with. I can no longer make the blades due to age and ailments. If you can let me know what kind of pattern you want I'll see what I have and send you one for free. If the tang is too short you can solder on a piece of all thread. All my sgians were made with through tangs and fastened in place. with a nut. You can email me at bagpiper66@bellsouth.net
Stickman (Ray).

[Navy87Guy]

I used to make sgians duhb and have more hand carved handles than I know what to do with. I can no longer make the blades due to age and ailments. If you can let me know what kind of pattern you want I'll see what I have and send you one for free. If the tang is too short you can solder on a piece of all thread. All my sgians were made with through tangs and fastened in place. with a nut. You can email me at bagpiper66@bellsouth.net
Stickman (Ray).

Thanks for the offer - and sorry for the delayed reply. For some reason, I didn’t see it!

Let me get into the project and get the old handle off to see what the tang looks like. I’m not very confident in my brazing skills, but I might give it a shot!

[stickman]

Hi navy guy, stickman again. If you braze extra length onto your heat treated blade don't forget to put a heat sink between the heat source and the blade. I lay my blades on a fire brick and put a heavy piece of steel over the blade and all but about a half inch of the tang. Good luck

[Navy87Guy]

Hi navy guy, stickman again. If you braze extra length onto your heat treated blade don't forget to put a heat sink between the heat source and the blade. I lay my blades on a fire brick and put a heavy piece of steel over the blade and all but about a half inch of the tang. Good luck

See…you’re making me nervous again!

[stickman]

See…you’re making me nervous again!

navy guy, stickman again, If you are unsure how to braze extra length to your blade send it to me and I will do it for you. If you call me at 919-661-7368 if no answer leave a message. I don't know how to put pictures on here. But I could send you some handle pictures to your email. also what is the main color in your kilt, I try to match a stone to the kilt. The only thing I will charge is shipping.
stickman. Ray.

[Paco500]

This thread really makes me happy. Here we have a guy looking to honour the memory of his father possibly making a connection with a guy coming out of ‘retirement’ to help out for no profit. I’ve been foolishly away from this forum for far too many years, and it would be logical to have come back and see that traffic was down and the community was diminished. But I don’t think it has. It has been refined. There may be fewer of us, but those that are her give a damn about the community and each other. This is a good place. I’m so fortunate to have come back. I kick myself for every leaving.

[Navy87Guy]

navy guy, stickman again, If you are unsure how to braze extra length to your blade send it to me and I will do it for you. If you call me at 919-661-7368 if no answer leave a message. I don't know how to put pictures on here. But I could send you some handle pictures to your email. also what is the main color in your kilt, I try to match a stone to the kilt. The only thing I will charge is shipping.
stickman. Ray.

Once I take apart the sgian dubh and see what I’m into, I’ll let you know. The offer is GREATLY appreciated!