Glamis Castle Prince Charles Edward Stuart tartan

[figheadair]

A good approximation Richard.

[OC Richard]

Thanks! It took several iterations and comparing each one to the photos to arrive at what I think is as close as I'm going to get.

Because if I change anything it throws something else off.

Next is playing around with "custom colours" or whatever they call it to try to get that specific green. The original appears to have a bit more olive than Gaelic Web's stock "flax green".

I will say that I think I prefer some of the 1819 KPB proportions especially when the black stripes which border the azure are a tad wider.

Those narrower black stripes make the sett feel a bit underpowered. Maybe I'll play with that.

[OC Richard]

Prince Charles Edward Stuart trews, West Highland Museum.

I thought I would come up with an approximation of this tartan as well.

It's impossible to know how close I've come because of the distortion in the photos. When my thread count is a 100% match compared to one portion of the trews, it's noticeably off compared to another portion of the trews. So I went with something that's at least around a 90% match everywhere.

Though superficially it resembles the Glamis fabric almost every proportion is different.

[OC Richard]

I tried to match colours. I only found two photos of the West Highland Museum trews, the colours are quite different, so I split the difference.

Here's my estimate of the Glamis Castle piece compared to my estimate of the WHM trews.

As we see the red/azure/black portion of the tartan is reduced with the WHM trews, and overall it's a bolder pattern, the Glamis fabric being more attenuated.

[OC Richard]

Now a third old example of PCES tartan has come on my radar, a bias-cut tartan suit in the NMS collection said to date to 1822.

Here's the three tartans compared.

Note that the green area stays pretty much the same, but the relative widths of the black/azure/red section vary from example to example.

Here's with my mockups which were carefully matched to photos of the originals. Clearly the NMS tartan suit has the narrowest azure and the widest red.



My preference is for the West Highland Museum Trews sett, with the widest azure and narrowest red.

[figheadair]

Richard,

Is there a reason that you have chosen to include the c.1822 (I think it's closer to 1830) against the other two when it is but one example of Wilsons' cloth in this pattern of which there are many surviving examples. Here for example, is another coat from the same era.



And here are four other examples of Wilsons' PCES dating from c.1790-1830.



Note the variations/proportional differences between the red and light blue, the larger black and green squares, and the relationship of the yellow and white.

[OC Richard]

For me it's an aesthetic exercise, a study in how changes in proportion impact the overall look.

Then there's the colour thing which I haven't got into much. Certainly the tartan looks dramatically different when the green is dark.

I also tried one with the blue being dark, it looked really nice, though the blue is supposed to be Azure.

Anyhow I've come up with a "threadcount" CGI thing that matches the NMS tartan suit.

Here in order of the width of the Azure and the narrowness of the Red are three relics.

My preference is for the look at left, the West Highland Museum trews. I think when the red stripe between the Azure stripes becomes around the same size as the other red band my "eye" isn't liking the overall sett as much.

Of course with Royal Stewart they doubled-down on the width of that red stripe, making it dominate the sett.