Looking for hardware to make a kilt belt

**usndoc** · 14th July 06, 07:12 AM

Thats close but not what we are looking for. You could probably remove the weird tab from the loop. But, I would rather find the ones used by most kilt belt makers. Less hassle.

That one is made for the buckle end... We need the one for the other end. It has the bent area to prevent the buckle tab from sliding up and down the D-ring.

**Southern Breeze** · 14th July 06, 09:11 AM

S&D Trading Co. may have what you need.

http://www.sdtradingco.com/

**cavscout** · 14th July 06, 09:31 AM

Might even try and call these companies and ask if they carry them. Sometimes they don't put everything on their web site.

**usndoc** · 14th July 06, 09:45 AM

I found these: 2" to 1" Nickel Metal Slide
at http://www.cdwplus.com/singleMS.html#anchor349828

They are very similar to what we are looking for. Except that the ones we want t do not have the middle bar. These may work for what I want but I need to measure to be sure.

**cavscout** · 14th July 06, 09:52 AM

Those look like a great alternative.

**Tartan Hiker** · 15th July 06, 08:52 AM

I made my own from a piece of 1/8" brass rod from Home Depot.

**usndoc** · 19th July 06, 08:22 AM

I stopped by the leather shop and showed him the one I found online. It appears that we really need the kilt belt style. I have a hard time believeing that there are no sources for this. Someone has to have access to them.

:-) I just have to figure out that they are called so I can google. Any continued help would be appreciated.