-
 Originally Posted by Barb T.
The herringbone stitch. My brain was mush this morning. Here it is:

If you did a herringbone where you caught just a few threads on each pass on the "outside" of the kilt, it would work the same, but Barb is right, the herringbone has more flexibility to it than a straight blind stitch. I usually do a "canted blind stitch", which is a term I just made to suggest that the stitch isn't straight across, it's "tilted".
-
-
 Originally Posted by Alan H
If you did a herringbone where you caught just a few threads on each pass on the "outside" of the kilt, it would work the same, but Barb is right, the herringbone has more flexibility to it than a straight blind stitch. I usually do a "canted blind stitch", which is a term I just made to suggest that the stitch isn't straight across, it's "tilted".
That term would describe any sewing that I would do - it would all be "tilted!"
-
-
 Originally Posted by Alan H
If you did a herringbone where you caught just a few threads on each pass on the "outside" of the kilt, it would work the same, but Barb is right, the herringbone has more flexibility to it than a straight blind stitch. I usually do a "canted blind stitch", which is a term I just made to suggest that the stitch isn't straight across, it's "tilted".
When you do a herringbone for a hem or a catch stitch, you do just catch a thread or two on the "outside" if the kilt.
-
-
The kilt was waiting for me when I got home from work. There is some good news and some very good news.
First of all, the hem

It's not actually been cut off. The kilting selvage is about 90% intact. What happened is that there was a weaving flaw about a half inch from the selvage. (See it where the pointy end of the pin is above?) Which is really too bad, because this is the old school selvage with the neat kilting edge, not the modern turned in edge. This flaw occurs every few inches. The kilt is pleated to the sett, so the flaw pops out in several obvious places.
Now some dim bulb decided that the way to fix this was to cut off the long doubled float..... which causes this
[
Again this happened in several places - so I can see why Michael thought the whole thing was whacked off.
That's the very good news. It won't need any of the serging or bias tape (though I'm saving both of those ideas for future kilts that WILL need them). Instead it will need a few bits of careful reweaving before turning up a very modest hem.
Looking at the buckles:
I don't think they have been moved. They still line up on the edge of the double pleat. I think the kiltmaker just only cared about lining up the tartan for the tab on the bottom one and didn't bother with the two that are covered by your belt. There's no way with this kilt's dimensions that the top tab ever lined up on the white stripe - that line is almost a half a sett away in either direction!
Again, very good news (but I will put the tongue side back on that is hanging by a thread, and restitch the one that is done in a poorly matching color.) Obviously, the buckle tabs were not a high priority for them, since the twill line is even upside down on the bottom tab! Since we don't have any way to get this fabric, I think you'll just have to live with the waist buckles. That bottom one offends me. I'm going to try to rework it.
The hand of the fabric is much "Fuzzier" than modern Lochcarron, not as "hard" a worsted, I suspect. The drape and hand are quite nice and it's been well taken care of. I'll go over it again, but other than the flaw in the hem, it looks good. The stitching is nice (I checked all the pleats and they are intact except for the double pleat at the apron side - which has popped loose at the bottom - I'll fix that when I restitch the leather side of the buckles.)
As the seller indicated, there are some stains and discoloration on the liner, just normal wear and tear. Do you want me to replace the muslin?
I was expecting a total disaster, but this baby just needs a little (very little) TLC and you'll have a fantastic kilt.
Last edited by ThreadBbdr; 14th May 08 at 06:40 PM.
Reason: fix photo link
-
-
 Originally Posted by ThreadBbdr
Now some dim bulb decided that the way to fix this was to cut off the long doubled float..... which causes this 
Again this happened in several places - so I can see why Michael thought the whole thing was whacked off.
Ok, what is a double float?
Wallace Catanach, Kiltmaker
A day without killting is like a day without sunshine.
-
-
Karla, Fabulous news, This does make me feel good. It seemed as if there were places where the kilt looked as if it had been uneven and sewn up. That was another reason I thought it had been hacked up. Anyway, if it is uneven that should make it slightly easier to find thread for reweaving (I hope). I was always told to keep the bottoms of trousers that had been hemmed for reweaving should the case arise.
It was the left belt I thought had been moved over to make the kilt larger. Well, that belt looked as if it had been resewn! Any ideas about that?
Don't bother with replacing the muslin.
Any idea on about how old this kilt is? My guess is about 40 years.
Chattancat, this is the kilt I mentioned to you. Sorry the tartan wasn't Chattan.
Thank you all!
-
Similar Threads
-
By O'Neille in forum DIY Showroom
Replies: 12
Last Post: 29th October 07, 02:48 PM
-
By jackson1863 in forum Kilt Advice
Replies: 19
Last Post: 10th October 07, 07:43 PM
-
By dpseadvr in forum General Kilt Talk
Replies: 10
Last Post: 30th July 07, 06:51 PM
-
By BonnieT100 in forum Professional Kiltmakers Hints and Tips
Replies: 13
Last Post: 12th May 07, 05:58 PM
-
By Rufus in forum Traditional Kilt Wear
Replies: 19
Last Post: 9th October 04, 02:22 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks