landscaping X-Kilt

[CMcG]

Let's get this straight...

Can you use a circular saw to cut one foot of length off a 4-foot piece of 2 x 4 lumber?

Can you use a tape measure to measure the distance between two points on the floor?

Can you solve this math problem? 22 - 8 = ????

Can you read this post?

Can you get in the car, drive to a store, and buy thread and cloth?

If you can do those things, you have the skill set to make an X-Kilt.

Hey, I can do all those things!

Maybe this summer I'll actually give it a try... I don't have access to a sewing machine though, so it might be a rather slow process

[Alan H]

Hey, I can do all those things!

Maybe this summer I'll actually give it a try... I don't have access to a sewing machine though, so it might be a rather slow process

Craigslist.

After making about fifteen kilts with my mothers old black Singer from the 1950's, I just got tired of not having a sewing machine with a zig-zag. Not that you can't make an X-Kilt on a sewing machine that lacks zig-zag (I've done it, in fact I am wearing a reverse kinguisse kilt as I write this, that I made on a no-zig-zag machine) but it DOES make things easier.

My old Brother late 70's machine is no fancy machine. It sews straight lines and it sews zig-zag. You can vary the number of stitches per inch, and you can vary the width of the zig-zag. That's it. Period. Oh, and you can sew in reverse....they all do that. It cost me $40.

[Alan H]

Oh, there is one other thing you probably should have....

You should be familiar with the catchphrase "measure twice, cut once" and what it means and how much grief it's going to save you.