Homemade Heavy Kilt Pin ready for a Gale

[Aussie_Don]

Honestly Kalok I've not had a problem with that. I mostly wear a large coin as a kilt pin using the same kind of magnet. I've never come close to losing it yet. It could happen, however the same would apply to many pins with a traditional closure if they caught on something as you suggested. If you try it I would recommend doing so around the house until you saw if it were going to work out okay for you. That way if it did come loss you likely would not lose it. The magnets are very strong.

My previous employer provided all staff with magnetic nametags -- I can vouch for the strength of the magnets.
You'd want to be sure that your fingers were clear of the interface when bringing them together. Even with the
"keeper" on the back, it is sticking to my steel filing cabinet and holding bits of paper up.


-Don