X Marks the Scot - An on-line community of kilt wearers.

   X Marks Partners - (Go to the Partners Dedicated Forums )
USA Kilts website Celtic Croft website Celtic Corner website Houston Kiltmakers

User Tag List

Results 1 to 10 of 218

Hybrid View

  1. #1
    Join Date
    8th February 04
    Location
    3389 Schuylkill Rd, Spring City, PA 19475
    Posts
    5,849
    Mentioned
    3 Post(s)
    Tagged
    1 Thread(s)
    Quote Originally Posted by Kilted Stuart View Post
    So what your saying RockyR is that if you wanted to splice the two you would have to turn the second piece of the double width and splice leaving a selvage on the bottom of half and a cut on the other, thats what makes you have to hem it. So the best and easiest way would be to cut the length from a full piece and then make the kilt.
    Yes... that's correct.

    MacHummel... sorry to jump into your thread here. There was no malice intended. The ML makes a GREAT looking kilt (and curtains and slip cover for a chair in my living room) and since you've ordered a "special run" of it, you won't have to contend with the "splicing" thing until you get down to the last pieces (and hopefully then the math works out right so you don't have to splice there either!).

  2. #2
    Join Date
    23rd January 04
    Posts
    4,682
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by RockyR View Post
    Yes... that's correct.

    MacHummel... sorry to jump into your thread here. There was no malice intended. The ML makes a GREAT looking kilt (and curtains and slip cover for a chair in my living room) and since you've ordered a "special run" of it, you won't have to contend with the "splicing" thing until you get down to the last pieces (and hopefully then the math works out right so you don't have to splice there either!).
    Bear mentioned the same thing to me a few years ago. I have a huge piece of the 9oz ML tartan in PV on my wall downstairs, and Rocky is completley right about the pattern. The splicing would be difficult, because even if you do try and flip the other half of a double, the weft and weave would be going another direction. I am sure it can be done somehow, but McHummell has the proper pieces, and it's not like the Xmarks tartan where people have ordered yardage that will be cut from the bolt, they have ordered kilts in the tartan.

    Quote Originally Posted by RockyR View Post
    The problem is with "A-Symmetrical tartans" (tartans that aren't mirror images of themselves). Most tartans have a 1234321 kind of color scheme. Some tartans are A-Symmetrical which means they have a 12341234 type color scheme. When they're asymmetrical, you can't join them like you described unless you HEM them.
    Considering most Canadians are of the 12341234 category as well, this is the perfect tartan for us

    Pete, I would have totally gotten in on this, but the wool MacKenzie Weathered had to come first.

Similar Threads

  1. Maple Leaf tartan on ebay
    By Alan H in forum Professional Kiltmakers Hints and Tips
    Replies: 7
    Last Post: 1st November 06, 09:46 PM
  2. Oak Leaf Kilt Pin
    By ozmeath in forum Show us your pics
    Replies: 8
    Last Post: 18th October 06, 03:09 AM
  3. Maple Leaf tie
    By dana in forum Show us your pics
    Replies: 11
    Last Post: 25th March 05, 07:39 PM
  4. New Kiltmaker - Maple Leaf Kilts
    By bear in forum Contemporary Kilt Wear
    Replies: 1
    Last Post: 17th February 05, 09:22 AM
  5. Maple Leaf Tartan...
    By macwilkin in forum General Kilt Talk
    Replies: 6
    Last Post: 27th September 04, 11:08 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

» Log in

User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v4.2.0