Making your own extra-swell tartan flashes

[The F-H.C.A.G.]

The drawback to putting the seam on the sides is that you wind up with a ridge 4 thicknesses thick along the edges and only two thicknesses thick at the center. And the fusible web only sticks to 2 sides, so, at the seam edges, you can't really stick everything together. So it doesn't produce the really nice, flat, smooth flashes that you can get without a seam.

Anyway, there are lots of ways to make flashes! Certainly no one right way.

Hogs and quiches,

B

I see the point, maybe I won't do it that way. No real reason to have reversible flashes anyway. Is there any reason to put the bit of fusible web over the folded over edges in the back? If the Steam-A-Seam works on the notched edge, it should work fine here too, right?

Has anyone tried Dritz Fray Check?

I have used it at the bottom of cheaper flashes to keep them from fraying more or, after they started to fray, and I had trimed some off, then applied the Fray Check. After it is dry, it's a little stiff, but not completely.

It's a liquid and comes in a small bottle. I also used this product on the fringes of a Fly Plaid that I self fringed and then braided the tassels. For that application it kept the tassels from coming unbraided.

Joanne sells it here.

I have used this, and posted about it, but, unfortunately, the test of time has shown that it only checks the fray for a few months

Be well,